megaspin 610
Digital automatic balancing machine for wheels up to 200 kg
The megaspin 630 is a high-capacity wheel balancing machine for heavy-duty wheels (up to 200 kg) with an integrated lift for easy loading, AutoSense sonar for accurate wheel measurement and a laser guide for accurate weight application, ensuring efficient and safe operation.
Automatic gauge for distance and diameter measurement for rims up to 32” allows an immediate and accurate detection of all necessary wheel parameters to correctly measure wheel imbalance.
Auto Sense device for automatic wheel width measurement.
The adhesive correction weights are position with great accuracy thanks to the laser line at 6 o’clock position which identifies the application point of the weight and to the electric brake that allows locking the wheel in the correction position.
The innovative spindle shaft that lifts and lowers acts as a lift built in the machine body, helping the operator during wheel loading and unloading. In fact, the wheel is loaded with no effort thanks to the lowest sliding trolley available on the market (59 mm) and is locked when it is still on the ground, ensuring a perfect centring in full safety conditions for the operator.
Technical data
| Single phase power supply | 230V/1ph/50 hz |
| 115V/1ph/60 Hz | |
| Max. absorbed power | 0,65 kW |
| Balancing speed | 130 rpm (for car) / 80 rpm (for truck) |
| Measuring cycle for car/truck wheel | 8 ÷ 20 s |
| Measurement uncertainty | ± 0.5 g |
| Resolution | 1 g (for car) / 10 g (for truck) |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5” ÷ 20” / 40 ÷ 510 mm |
| Rim diameter setting range | 10” ÷ 30” / 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 8 ÷ 12 kg/cm2 / ~ 0.8 ÷ 1.2 MPa |
| ~ 8 ÷ 12 bar / ~ 120 ÷ 165 psi | |
| Max. wheel weight | 200 kg |
| Max. wheel diameter | 1380 mm |
| Machine weight | 230 kg |
Accessories
GLM40 kit
Quick locknut with handwheel GLM40, sleeve and ring.
WDK gauge
WDK gauge
Pincer-hammer
Pincer-hammer and 300 g. counterweight.
IV/V cones-GG-G40 kit
To centre truck or bus wheels with a central hole of 202/221/281 mm Ø. Made up of IV and V cones, G40 disc and GG ring.
SR215/2 kit
To centre wheels with 8 holes on 275/285.75 mm Ø and with 10 holes on 225/285.75/335 mm Ø. Supplied with centring adaptor, 5 and 4 armed spiders, stud bolts and screws.
Car adaptor kit
For wheels with a central hole of 45-194 mm Ø. Consists of 4 cones.
GLM40 kit
Quick locknut with handwheel GLM40, sleeve and ring.
WDK gauge
WDK gauge
Pincer-hammer
Pincer-hammer and 300 g. counterweight.
IV/V cones-GG-G40 kit
To centre truck or bus wheels with a central hole of 202/221/281 mm Ø. Made up of IV and V cones, G40 disc and GG ring.
SR215/2 kit
To centre wheels with 8 holes on 275/285.75 mm Ø and with 10 holes on 225/285.75/335 mm Ø. Supplied with centring adaptor, 5 and 4 armed spiders, stud bolts and screws.
Car adaptor kit
For wheels with a central hole of 45-194 mm Ø. Consists of 4 cones.